9640: VHB adhesive produced by 3M used for most surfaces including metal, glass, and most plastics. It is very strong and flexible with a thickness of .0512"

L.E.: "Low Energy" adhesive used for surfaces like Epoxy, PP plastics & other hard surfaces where the 9640 adhesive will not bond. Thickness = 0.984"

T.T.T.: "Textile Thermal Transfer" adhesive for Textiles, it is applied using traditional heat transfer.

T.T.S.: "Thermal Transfer Synthetic" adhesive for flexible plastics like PVC, synthetic leather, etc..

Dome Height (Thickness):

This measurement represents the actual height of the logo above the surface it is applied to.

Type 1: 0.3543 inches (+/- .0591")

Type 2: 0.5906 inches (+/- .0591")

Type 3: 0.7087 inches (+/- .0591")

Testing Results:

Q-UV Test: 1600 hours - approved

Brush-Abrasion: 65,000 cycles immersed in water soap solution - approved

Humidity: 1000 hours 22oC 80% humidity - approved