 |
 |
APPLICATION
GUIDE
Back
to clear coats Section |
|
| How To Apply Color Blender |
CB-3012 Color Blender is intended for use as a tool to blend with Pearls, Candy Concentrates, and Flakes. |
| Mixing Ratio |
Mix 1 part CB-3012 to 1 part AMR-2712 Reducer. |
| Application |
Adjust air pressure at the gun to 35-45 psi for gravity or siphon feed application or 5-7 psi at the cap for HVLP.
Apply 1-2 light to medium coats of the color blender onto the blend area, extending each coat a little further each time. Allow 5-10 minutes between coats. |
| Dry times at 77° F |
Dust Free in Time 10 minutes
Tack Free Time in 15 minutes
Tape Free Time in 45 minutes |
| |
|
|
|
|
In order to view our Technical Data Sheets and Material Safety Data Sheets, you will need to have Adobe Reader, which is free, easy to use, and can be downloaded by clicking  on the link below. |
*NOTE: Pop-Up Blockers MUST be Turned off to view these pages |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
|
|
