| Step 1.-
Prep and basecoat your part as you would any other paintjob.
Step 2.- Apply 1 medium to wet coat
of Crazer to the surface.
Step 3.- Immediately use cling wrap
or your choice of texturing tool to produce the desired
effect. ( Apply cling wrap to the entire part then rub
the cling wrap down with your hand to insure contact with
surface then remove the cling wrap leaving you with a
marble like finish.)
Step 4.- Let dry (Usually 3-5 mins.)
Step 5.- Topcoat with poly-urethane
clear or your choice of topcoats.
|
