 |
 |
APPLICATION GUIDE |
|
| |
| Hawaiian Hues are medium solid basecoats. Though designed as a basecoat they work equally well for graphic work and even airbrushing. These vibrant basecoats provide excellent coverage and fast dry times. Designed by a custom painter with the custom painter in mind. |
Benefits: |
- Increased productivity
- Less overall material usage
|
Compatible surfaces: |
- Any of Alsa’s surface primers (list numbers).
- Clean, sanded OEM finishes.
- AMR-2712 Fast, Medium or Slow Urethane reducer depending on conditions.
- ALL of Alsa’s basecoat products including Base Pearls, Hawaiian Hues, Stylin Basecoats etc.
|
Required products: |
- AMR-2712 Fast, Medium or Slow Urethane reducer depending on conditions.
|
Surface preparation: |
- Wash area thoroughly with soap and water to remove contaminates that solvent based cleaners cannot effectively remove.
- Clean prepared area with Wax and Grease remover. For maximum adhesion treat all bare metal with a quality metal conditioning system or prime with AEP-3027 Epoxy Primer, ASEP-332 Self Etching Wash Primer.
- Fill any imperfections with APS-2712 Primer Surfacer. Final sand the surface wet or dry with 600 grit sandpaper or finer before applying basecoat.
- Mix 1 part Hawaiian Hues Basecoat with 1 equal part AMR-2712.
|
Mixing ratio: |
- Mix 1 part Hawaiian Hues Basecoat with 1 equal part AMR-2712 (1:1).
|
Application: |
- Apply 2-3 medium/wet coats at 25 psi allowing 10-15 minutes flash time between coats.
|
Dry Times at 77F: |
- Dust free in 5 minutes
- Tack free in 10 minutes
|
| Force Drying: |
- Flash time @ 77F………..5 Minutes
- Bake time @ 140F………10 Minutes
|
Allow 15-30 minutes before applying the Alsa topcoat of your choice. |
| |
|
|
|
HH-MSDS |
In order to view our Technical Data Sheets and Material Safety Data Sheets, you will need to have Adobe Reader, which is free, easy to use, and can be downloaded by clicking  on the link below. |
*NOTE: Pop-Up Blockers MUST be Turned off to view these pages |
|
| |
|
