Step 1. - Begin by applying the MirraColor over a black High Gloss polished surface.
Step 2. - Apply the MirraColor in a light “dust” coat taking care to apply a uniform amount to the entire piece. (For best results we recommend an Iwata LPH-50 with a 1.0 tip. Keep your hand at least 6 inches from the surface and have the material control just “cracked” open. Too much material being applied will result in a duller overall finish).
Step 3. - Continue “dusting” the MirraColor for a total of 2-3 even passes.
Step 4. - If you have excess dust or overspray from the application process you can now wipe it away with the soft flannel polishing cloth (included with all MirraColor kits).
**NOTE: The wiping of the MirraColor is OPTIONAL and only required if you experience a heavy accumulation of “dust” on the surface due to the light application.
Step 5. - You are now ready to topcoat the MirraColor with SpeedClear in a can. Begin by applying 1-2 Even coats to the entire surface. Allowing 10-15 minutes between coats to “Flash”.
**NOTE: You will notice the color “Come to Life” as soon as you apply the topcoat. The look of the MirraColor AFTER being topcoated is a “night and day” difference when compared to the color before clearcoating.
** Allow the topcoated parts to dry for at least 1hr. to touch, and 8-12 hrs to sand or buff. |
