Makes (12) TWELVE Full Gallons! Code: ST-SAMPLE2 Price: $2,400.00
The application costs of SofTouch® Paint will vary depending on the type of substrate, the shape of the part being coated and the volume of coatings purchased. We estimate the cost of application to run approximately .38 cents per square foot for materials, not including waste or labor.
Candy Concentrates The most vibrant Candy Concentrates on the market
11 Color Set - 4 ounce each (CST11) $700.00
Unlike most Candy Concentrates, ours contain much higher levels of actual pigment rather than solvent giving you nearly twice the coverage and a much more even distribution of color. We have many Candy Concentrates with which any candy color can be achieved, giving you unlimited color options. You'll be amazed what a few drops will do. (Learn more)
***Candy colors shown over "Silver" Stylin Basecoat (ASB-02)
Alsa's SofTouch® is the softest two component urethane paint on the planet! Ultra soft to the touch, it feels like expensive suede or soft leather but offers the tough as nails performance of an automotive grade two component urethane finish. It can be applied as a clear translucent topcoat over a wide variety of substrates and basecoats to produce a lustrous full matte finish. Or, mix with our Candies to create a tinted full coverage monocoat (black and red are popular favorites!).
This product carries full test approvals from some of the largest general industrial clients on earth. It is used on automotive interiors, expensive furniture, computer peripherals, hairdryers and even aviation dashboards. SofTouch® instantly transforms hard surfaces into sensational new textures that feel like Velvet, Silk or even Rubber! Use it on door handles & side panels, drawer knobs & pulls, furniture armrests, tool & appliance handles and virtually any surface that paint will stick to. NOTE: Alsa SofTouch® Paint is not intended for Private Consumer use!
Ease of Application: Alsa SofTouch® Paint coating is simply sprayed on using traditional spray painting equipment.
Low Cost / High Margins: Alsa SofTouch®
Paint coating adds a negligible amount to operating costs;
yet products finished with this type of soft coating can
demand significant sales price increases over identical
products with hard surfaces.
Design Options: Alsa SofTouch® Paint
coating can be ordered clear or with a custom color. So
you have the option of just changing the feel of a
product's surface or changing its appearance as well.
Applicable to Almost Any Substrate: Alsa
SofTouch® Paint coating is a very adaptable coating
that can adhere to almost any surface.
Durability: Alsa SofTouch® Paint coating
not only creates products that are soft to touch, it also
improves the durability of the product surface. It is
both scratch & mar resistant.
*** Of course, the best way to appreciate a product coating
like this is to feel it!
Alsa's SofTouch® Coating is applied using conventional spray painting equipment.
Primer: A primer is not needed for most plastics however specific primers for metals and hard-to-coat plastics are available. Alsa SofTouch® Coating: The topcoat is sprayed on then the product must be force dried.
Alsa SofTouch® Coating is made up of: Resin - ST2010 Resin is the main component of SofTouch® coating. Thinner - ST2011 Thinner Hardener - ST2012 Hardener is used with Alsa SofTouch® coating.
Alsa SofTouch® Resin
Alsa SofTouch® Paint clear coat ST2010 is a two-pack transparent or pigmented polyurethane topcoat characterized by a deep mattness and a pleasant tactile softness to the touch.
Inorganic. Polyester based resin.
The following data is dependent upon color
Aromatic hydrocarbons, esters
1.02 ± 0.02 g/cm3
Viscosity, Brookfield sp.5, 50 rpm:
30 ± 5 sec. Zahn #3
Non-volatile Content (as packaged)
Solids content; by weight:
Solids content; by volume:
2° C or 35°F
400 sq. Ft/ gallon @ 1 mil
Plastic (ABS, Polycarbonate, Polystyrene)
ST2010 could be applied onto DJ331/332/334, TG701 or TG702 basecoats. Also to plain plastic.
Alsa Soft Feeling Paint Hardener ST2012
Mixing ratio by volume
ST2010 resin :
Conventional spraying, 0.04 mil nozzle, 6 to 14.5 psi fluid pressure, 50-60 psi atomizing pressure.
23 - 28 sec. Zahn #2
4 Hours @ ambient conditions.
Recommended dry film thickness:
5 minutes at ambient conditions.
30-40 minutes at 150°F.
Clear or Pigmented
Range from 2 30 units @ 60° angle.
Minimum 96 hours at 130°C
Store at ambient conditions and away from open flame.
** Warning: Soft Feel paint
is highly flammable. Please take care in storing and applying
it away from open flame or high heats. It is also poisonous
if ingested, so please store it away from children.
Due to the inability of Alsa to anticipate or control conditions whereby Alsa products will be employed, Alsa does not represent or guarantee that any Alsa product is fit for a particular purpose. Alsa products should be tested by users to determine suitability for a particular purpose. Alsa disclaims responsibility for claims and damages beyond replacement of any defective Alsa product. There are no warranties which extend beyond the description on the face here of.