Prep and basecoat your piece as you would any other paintjob.
Step 2. - Mix SpectraFX at a ratio of
1 gr. per ounce of liquid using an inner coat clear, color
blender, or even your final clear. 1 gr. per ounce will
yield a high concentration of SpectraFX using more than
this can actually decrease the overall look. However using
less even ¼ to ½ gr. per ounce will still
produce dramatic color change effects. (Try mixing various
ratios and spraying them on sample panels until desired
effects are achieved.)
Step 3.- Apply SpectrFX with one wet
or two medium coats. (Again take caution here as to much
will deaden the overall effect.)
Step 4.- Allow to dry before clearing
with a poly-urethane clear or your choice of topcoats.