Location:
1213 East 58th Place, Los Angeles, CA 90001
Call Us: (800) 999-4120
Email Us: info@alsacorp.com
Custom Paint • Chrome Paint • Paint Wrap • Additives • Decorative Car Wrap Films

Hawaiian Hues

Product Info  | Pricing  |  Bullet Points  |  Product Showcase |  Related Products

Product Info

P1060316b_s

The magic of the Hawaiian Islands are transformed into captivating vibrant colors when Hawaii’s own world renowned custom painter, Dennis Mathewson harnesses the essence of his tropical paradise and its beauty in the hot, new base and graphic colors of Hawaiian Hues.

These tropical colors from paradise bring a whole new aspect to the Alsa line. Always looking to meet the needs of loyal consumers these paints were manufactured to meet the industry demand of airbrush artists as well as the full blown custom painter. Hawaiian Hues base and graphic colors were designed by a custom painter for the needs of custom painters everywhere. These primary and secondary base colors are formulated with rich, intense, pigments that ensure solid coverage. The islands call out with the vibrancy of colors reminiscent of a fiery lava flow, lush green ferns in a tropical rain forest, a fresh sliced juicy pineapple, a clear blue ocean wave or a warm, starry night’s sky and more to remind you of what true bright colors should resemble.

Pricing

Simply click on the product you would like to purchase from the list below and you will be taken to a screen where you can place your order. Then proceed to checkout or return to this screen if you would like to continue shopping.

Dealers Hawaiian-H-image
Hawaiian Hues

4 Ounces

$29.99
Hawaiian Hues

1 Pint

$69.00
Hawaiian Hues

1 Quart

$99.00

Click the Buy Now Button to Choose Size and Color

buy-now-button-green-80px

Alsa Base Pearls Killer Can

Also available in Killer Cans!

9 Different Colors to Choose From!

$39.99 / can

buy-now-button-green-80px

Bullet Points

Hawaiian Hues are a bright, vibrant pigment, reminiscent of the gorgeous, lush colors of the Tropics, in an automotive grade urethane paint.

Hawaiian Hues should be shot over a white base coat for best results.

Hawaiian Hues should be top coated with a good clear coat (such as Alsa’s Mirraclear, part number “KC-MCLR”) for durability, and a deep, water-wet gloss look.

  • Rich, vibrant, eye-popping colors
  • Favored by airbrush artists
  • Automotive grade urethane
  • Compatible with most primers, and clear coats
  • Specialty Paint Collection
  • Advanced UV inhibitor Protection
  • Extremely high pigment level for amazing coverage
How To (Application Guide):
  1. If your piece already has primer applied, proceed to step number 11. If your piece already has primer AND a WHITE base coat applied, then lightly scuff the surface for adhesion, and proceed to step number 12. If your piece already has a factory finish on it, that is not white, you can lightly scuff that, and proceed to step 11. If your piece already has a factory finish on it that is white, you can simply scuff that and proceed to step number 12.
  2. Always apply paints in a well-ventilated area, and wear a NIOSH approved respirator to avoid breathing any fumes.
  3. 3)
  4. Make sure you have good conditions for spraying. The best temperature for spraying this paint, is 75-80 degrees F, and VERY low humidity.
  5. Prepare and prime your part first. Epoxy primers are best for bare metal, and primer surfacers are best for plastics, fiberglass, or wood. Some plastics may require an adhesion promoter but most plastics, like ABS plastic, are fine without adhesion promoters. Our tech support department can assist with what primer is best, if you are uncertain.
  6. Before applying your primer, remove all dirt, grease, oil, salt, and chemical contaminants, by washing the surface with a commercial detergent, or other suitable cleaning method.
  7. Rinse with fresh water and allow to completely dry.
  8. Remove any existing loose paint, or rust, etc, with a wire brush or sand paper.
  9. Lightly sand glossy surfaces to create a surface profile for adhesion.
  10. Apply your primer to the surface according to the manufacturers’ specifications for your particular primer.
  11. Let your primer cure according to the manufacturers specifications for your particular primer, and then lightly scuff that to create a surface profile for adhesion.
  12. Apply a white base coat (such as Alsa’s Pure White,) as your under coat for your Hawaiian Hues paint. About 2-3 coats, with 15-20 minutes between coats. Let the final coat dry for 15-20 minutes before proceeding.
  13. Now apply your Hawaiian Hues base coat, using steady even passes, from about 8-10 inches away from the substrate, until you achieve an even coverage.
  14. If a second coat is required, let the first coat flash for about 15-20 minutes, and then apply your second coat over that, again making sure to use steady even passes.
  15. Let your base coat flash for approximately 15-20 minutes, and then apply any high quality clear coat (such as Alsa’s Mirraclear, or ALSA’s Speed Clear), for durability, and a deep, water-wet look.

Product Showcase